Hobs take the worst of daily cooking: spills, splashes, and burnt-on residue that builds up around burners and beneath pan supports. A MINT hob clean removes that build-up properly using the right tools and products for each hob type, leaving the surface genuinely clean rather than just wiped over.
Book a CleanPrices
Gas Hob with Burners
Burner caps, jets, pan supports, hob surface
£25
Ceramic or Induction Hob
Glass surface, control panel and surround
£15
Added to your oven clean. No extra call-out charge.
Gas hobs
Burner caps, jets and pan supports.
Gas hobs accumulate grease and food debris in places that are difficult to clean by hand: around the burner ports, beneath the pan supports, and in the gaps between the burner caps and the hob surface. Blocked burner ports reduce the flame pattern and affect cooking performance.
MINT removes the burner caps and pan supports, soaks them, and clears the ports without damaging them. The hob surface is degreased around each burner, and the control knobs and surrounding trim are cleaned before everything is reassembled and tested.
What's included
Burner caps
All burner caps removed and soaked to dissolve baked-on grease and food residue.
Burner ports cleared
Each burner port is cleared of debris to restore the correct flame pattern. Ports are never drilled out or enlarged.
Pan supports removed and cleaned
Cast iron or enamel pan supports removed, soaked, and scrubbed.
Hob surface degrease
The hob surface around each burner is degreased and cleaned.
Wok burner (if fitted)
Wok burners and their separate ring are cleaned at the same time.
Control knobs and trim
All control knobs and surrounding trim are degreased and wiped down.
Reassembly and test
All parts reassembled in the correct order. Each burner is lit and tested before the technician leaves.
Ceramic and induction hobs
Glass surface and surround.
What's included
Burnt-on residue removed
Specialist ceramic hob scraper and cleaner used to lift sugar deposits, milk burns, and carbon build-up without scratching the glass.
Glass surface polished
The full cooking surface is cleaned and polished to a clear, streak-free finish.
Zone surround
The areas around each heating zone, where spills collect, are cleaned as part of the main surface treatment.
Control panel
Touch controls or rotary knobs cleaned and degreased.
Surrounding trim
The frame and surrounding stainless or enamel trim degreased and wiped down.
Ceramic and induction hobs are glass surfaces that need the right products and the right tools. Abrasive pads scratch the glass permanently. Generic spray cleaners leave a film. The wrong approach with a scraper on a sugar spill can chip the surface.
MINT uses specialist ceramic hob cleaners and purpose-built scrapers to remove burnt-on deposits safely, then polishes the surface to a clear finish. The control panel and surrounding trim are cleaned at the same time.
Book your hob clean today.
Add it to your oven clean booking. One visit, whole kitchen sorted.
Book a Clean